If you have heard the sound of your toilet running periodically at random times of the day or night or if the toilet seems to never stop running, you may understandably be wondering what you can do to fix the problem. The fact is that a leaking flush can create annoying and bothersome sounds in your home that can prevent you from relaxing and even sleeping peacefully at night. More than that, this is an issue that can also inflate your water bills due to unnecessary water waste. Fixing the leak immediately can be highly beneficial, and there are a number of steps that you can take to address the problem.
Step 1
First, you should check the flapper located at the bottom of your tank when attempting to repair a leaking flush. Remove the tank lid to inspect the flapper. In some cases, the flapper may be visibly out of place or warped, and you may be able to determine with a basic inspection that this is causing the issue. You may also need to place your hand on top of the flapper and apply pressure to determine if this is the issue. If you apply pressure to the flapper and the toilet stops running, this is a sign that the flapper needs to be replaced. Replacing a flapper involves buying a new flapper and installing it according the directions on the packaging.
Step 2
If the flapper is not the issue causing your leaking flush, you should then inspect the fill valve. To accomplish this, flush the toilet. As the water level is rising in the tank after the flush, lift the float arm up. You may need to adjust the float arm slightly by gently bending it. By doing this, the water level in the tank may stop when the level reaches about a half of an inch or an inch below the fill line on the overflow pipe. This may resolve the leaking flush issue.
Step 3
If this does not remedy the leaking flush situation, your next step should be to remove the fill valve altogether. To accomplish this, turn off the water supply by turning the knobs located at the back of the tank. Then, flush the toilet so that the water drains out of the tank. Remove the rest of the water with a cup and sponge.
Step 4
Once all of the water is out of the tank, remove the water supply line, and unscrew the locknut on the fill valve unit. Remove the old valve, and install a new fill valve unit that you have purchased at a local hardware supply store. It may need to be trimmed down to size using a hacksaw. Ideally, the height of the overflow pipe will be about an inch below the overflow pipe. Ensure that the locknut on the newly installed valve is tight. Then, allow water to fill into the tank again. This should resolve the issue of a leaking flush for you. If it does not, it may be time to call a professional Singapore plumber for assistance with your leaking flush.
A leaking flush can be bothersome and even costly to deal with, so it does make sense to fix the problem quickly. As you can see, there are several steps that you can take to address your problem with a leaking flush, and all of the tools and supplies you need may be found at a local hardware store. While these steps will resolve most issues with a leaking flush, the fact is that some repair issues require greater skills and expertise. If you have attempted to make the repair on your own or if you are not comfortable completing these steps on your own, you can contact a reputable plumber for professional assistance today.
